Start free
← Back to Study Material
Study material · UPSC

Geography: The Earth: Origin, Interior and Tectonics

Chapter 1 of Geography, complete and free to read.

1.1Geography as a Discipline

Universe, Solar System, Interior of the Earth, Plate Tectonics, Earthquakes and Volcanoes

1.1.1Nature and Scope

  1. The term geography was coined by the Greek scholar Eratosthenes. It literally means "description of the Earth".
  2. Geography studies the cause-and-effect relationships between two or more phenomena on the Earth's surface. It asks three questions: what (patterns), where (distribution) and why (cause and effect).

1.1.2Branches of Geography

  1. Regional geography studies all phenomena within one region, and was developed by Carl Ritter. Systematic geography studies one phenomenon across all regions, and was developed by Alexander von Humboldt.
  2. Physical geography includes hydrology, geomorphology, soil geography and climatology. These study the natural environment of the Earth.
  3. Human geography includes population, economic, historical, socio-cultural and political geography. These study how people live on and use the Earth.
  4. Biogeography includes environmental geography, ecology, zoogeography and plant geography. It studies the distribution of living things.
RECALL ANCHOR
  1. Geography coined by Eratosthenes; questions: what, where, why.
MIX-UP ALERT
  1. Humboldt vs Ritter: Humboldt is linked with systematic geography; Ritter with regional geography. The notebook had these reversed.
EXAM TRAIL
  1. Likely angle: match branches of geography with their sub-fields or founders.

1.2Origin of the Universe and the Solar System

Phases of the Moon through the 29½-day synodic month
Phases of the Moon through the 29½-day synodic month
Solar and lunar eclipses: umbra, penumbra and alignment
Solar and lunar eclipses: umbra, penumbra and alignment

1.2.1The Big Bang Theory

  1. The Big Bang theory states that the universe began from a tiny point of infinite temperature, pressure and density that expanded about 13.8 billion years ago. Matter then cooled and condensed slowly into atoms, stars and galaxies.
  2. The theory is supported by Edwin Hubble's discovery that galaxies are moving away from each other. Fred Hoyle proposed the rival Steady State theory, but most scientists accept the Big Bang.

1.2.2Formation of Stars and Planets

  1. Energy and matter were not evenly spread, so gravitational forces differed from place to place. Matter collected under gravity into a nebula, a very large cloud of gas and dust.
  2. Within the nebula, localised lumps of gas condensed into stars. Around these cores, rotating gas and dust collided and stuck together to form planets.

1.2.3Theories of the Solar System

  1. The Nebular Hypothesis of Immanuel Kant and Pierre-Simon Laplace held that planets formed from a rotating nebula around a young Sun. This idea was later revived by Otto Schmidt and Carl Weizsäcker.
  2. Chamberlin and Moulton rejected the nebular idea and proposed that a wandering star passed near the Sun and pulled out material that condensed into planets. Jeans and Jeffreys supported a similar tidal theory.

1.2.4Inner and Outer Planets

  1. The inner (terrestrial) planets — Mercury, Venus, Earth and Mars — lost their early hydrogen-helium atmospheres to strong solar winds. Being smaller, their weak gravity could not hold those light gases.
  2. The outer (Jovian) planets — Jupiter, Saturn, Uranus and Neptune — lie far from the Sun, so solar winds did not strip their atmospheres. Their large mass and strong gravity let them keep thick gaseous envelopes.
RECALL ANCHOR
  1. Big Bang: 13.8 billion years, supported by Hubble; rival: Hoyle's Steady State.
  2. Nebular: Kant–Laplace (revived by Schmidt–Weizsäcker); planetesimal: Chamberlin–Moulton.
MIX-UP ALERT
  1. Inner vs Jovian: inner planets are small, rocky and lost their primary atmosphere; Jovian planets are giant, gaseous and kept it.
EXAM TRAIL
  1. Likely angle: statement questions on theories of the origin of the solar system and their proponents.

1.3Earth's Motions, Seasons and Time

The Earth's revolution: solstices, equinoxes, perihelion and aphelion
The Earth's revolution: solstices, equinoxes, perihelion and aphelion
Day and night at the solstices: circle of illumination and the overhead Sun
Day and night at the solstices: circle of illumination and the overhead Sun
Longitude and time: 15° = 1 hour, the IST meridian and the International Date Line
Longitude and time: 15° = 1 hour, the IST meridian and the International Date Line

1.3.1Rotation and Revolution

  1. Rotation is the spinning of the Earth on its axis from west to east, taking about 24 hours. It causes day and night and the Coriolis force.
  2. Revolution is the movement of the Earth around the Sun in an elliptical orbit, taking about 365¼ days. Together with the 23½° tilt of the axis, it causes the seasons.

1.3.2Perihelion, Aphelion and Solstices

  1. The Earth is nearest the Sun at perihelion (about 3 January) and farthest at aphelion (about 4 July). The effect on seasons is small because land and sea breezes and the tilt matter far more.
  2. On the June solstice (21 June) the Sun is overhead at the Tropic of Cancer, and on the December solstice (22 December) at the Tropic of Capricorn. On the equinoxes (21 March and 23 September) it is overhead at the Equator, and day and night are equal everywhere.

1.3.3Longitude and Time

  1. The Earth turns 360° in 24 hours, so every 15° of longitude equals one hour of time, and 1° equals four minutes. Places east of Greenwich are ahead in time and places west are behind.
  2. Standard time is the local time of a chosen central meridian, applied to a whole country or zone. India uses one standard meridian, 82°30' E, which is 5½ hours ahead of GMT.
RECALL ANCHOR
  1. 15° = 1 hour; 1° = 4 minutes; IST = GMT + 5:30.
  2. Perihelion 3 Jan, aphelion 4 July; solstices 21 June / 22 Dec; equinoxes 21 Mar / 23 Sep.
MIX-UP ALERT
  1. Perihelion in January does not make the northern winter warm — seasons depend on axial tilt, not distance from the Sun.
EXAM TRAIL
  1. Likely angle: time-difference calculations from longitude, and causes of seasons.

1.4Evolution of the Earth and its Atmosphere

1.4.1Differentiation of the Earth

  1. The early Earth was rocky, barren and hot, with a thin atmosphere of hydrogen and helium. As it cooled, heavy materials such as iron sank to the centre while lighter materials rose to the surface, an event called the iron catastrophe.
  2. This layering was further disturbed by the Big Splat, a giant impact that is thought to have formed the Moon. Over time the Earth separated into crust, mantle and core.

1.4.2Evolution of the Atmosphere

  1. The Earth's first atmosphere of hydrogen and helium was stripped away by solar winds, as happened on all inner planets. A second atmosphere then formed from gases released from the interior.
  2. During cooling, water vapour, nitrogen, carbon dioxide, methane, ammonia and some oxygen escaped from the interior, a process called degassing. Volcanic eruptions added further gases.
  3. As the Earth cooled more, water vapour condensed and fell as rain, which collected in depressions to form the oceans. Carbon dioxide dissolved in the rainwater and the oceans.
  4. Later, photosynthesis by early life added free oxygen to the atmosphere, building the present air. The Earth also has the highest density of all planets in the solar system.
RECALL ANCHOR
  1. Stages: primordial (H, He) → degassing → condensation and oceans → photosynthesis (O₂).
MIX-UP ALERT
  1. Degassing vs photosynthesis: degassing released gases from the interior; photosynthesis later supplied free oxygen.
EXAM TRAIL
  1. Likely angle: sequence the stages in the evolution of the atmosphere.

1.5Interior of the Earth

Interior of the Earth: layers and discontinuities
Interior of the Earth: layers and discontinuities

1.5.1Sources of Information

  1. Direct sources are surface rocks, material from deep drilling projects and material thrown out in volcanic eruptions. These sample only the upper crust.
  2. Indirect sources include mining data on rising temperature and pressure with depth, and meteors, which share the Earth's material. Gravitation, magnetic field and above all seismic waves also reveal the interior.

1.5.2Composition

  1. For the Earth as a whole, the most abundant elements in order are iron, oxygen, silicon and magnesium. Iron leads because of the heavy iron-nickel core.
  2. In the crust, the order is oxygen, silicon, aluminium and iron. Oxygen and silicon together form nearly three-quarters of the crust by weight.

1.5.3Structure of the Earth

  1. The crust is the thin outer layer with a density of about 2.7 g/cm³; continental crust is thicker than oceanic crust. The crust and the uppermost mantle together form the rigid lithosphere.
  2. Below it lies the asthenosphere, a weak, partly molten zone up to about 400 km that is the main source of magma. The mantle extends to about 2,900 km and forms about 84% of the Earth's volume.
  3. The outer core (2,900–5,100 km) is liquid, and the inner core is solid, reaching the centre at about 6,371 km. The core, made mostly of iron and nickel, is called the barysphere (NIFE) and has a density of over 10 g/cm³.
RECALL ANCHOR
  1. Crust O > Si > Al > Fe; Earth Fe > O > Si > Mg.
  2. Mantle = 84% of volume; outer core liquid, inner core solid.
MIX-UP ALERT
  1. Lithosphere vs asthenosphere: lithosphere is rigid (crust + upper mantle); asthenosphere below it is soft and partly molten.
EXAM TRAIL
  1. Likely angle: arrange elements of the crust by abundance; match layers with their properties.

1.6Earthquakes and Seismic Waves

1.6.1Meaning and Terms

  1. An earthquake is the shaking of the Earth's surface caused by a sudden release of energy when rocks break or slip along a fault. Most earthquakes occur in the lithosphere, mainly at plate boundaries.
  2. The point inside the Earth where energy is released is the hypocentre or focus. The point on the surface directly above it is the epicentre, where shaking is usually strongest.

1.6.2Body Waves and Surface Waves

  1. Body waves travel through the interior in all directions and change speed and direction as density changes. They are of two types: P-waves and S-waves.
  2. P-waves (primary) are the fastest and reach the seismograph first; they travel through solids, liquids and gases and move by compression and expansion parallel to their direction. S-waves (secondary) are slower, travel only through solids, and vibrate at right angles to their direction.
    • Because S-waves cannot pass through the liquid outer core, they reveal that it is liquid. This creates a large S-wave shadow zone beyond 105° from the epicentre.
    • P-waves bend on entering the core and leave a P-wave shadow zone between 105° and 145°. The S-wave shadow zone is therefore much larger than the P-wave one.
  3. Surface waves form when body waves interact with surface rocks and are the last to be recorded. They include Love and Rayleigh waves and cause the most destruction.

1.6.3Measuring Earthquakes

  1. The Mercalli scale measures intensity, that is, the visible damage, on a scale of I to XII. It depends on distance from the epicentre and local conditions.
  2. The Richter scale measures magnitude, the energy released, on a scale of 0 to 10. Each whole number is about 32 times more energy than the one below; today the moment magnitude scale is preferred for large quakes.

1.6.4Causes and Distribution

  1. Earthquakes occur at ocean–ocean, ocean–continent and continent–continent convergent boundaries, and at divergent mid-ocean ridges. They also occur along transform faults such as the San Andreas.
  2. They are common in the Mediterranean–Himalayan belt and the Pacific Ring of Fire. Some occur within stable cratons when old faults reactivate, and some are human-induced by reservoirs, mining or fracking.
RECALL ANCHOR
  1. P = primary, parallel, passes all states; S = secondary, solid only.
  2. Shadow zones: S beyond 105°; P between 105°–145°.
  3. Mercalli = intensity (I–XII); Richter = magnitude (energy).
MIX-UP ALERT
  1. Focus vs epicentre: the focus is underground; the epicentre is on the surface above it.
  2. The notebook gave 142°; the standard textbook figure for the P-wave shadow zone is 105°–145°.
EXAM TRAIL
  1. Likely angle: properties of P- and S-waves and what shadow zones reveal about the core.

1.7Volcanoes and Volcanic Landforms

World distribution of volcanoes and geyser areas along the plate boundaries
World distribution of volcanoes and geyser areas along the plate boundaries

1.7.1Materials of Volcanoes

  1. A volcano throws out lava, pyroclastic debris, volcanic bombs, ash and gases. The main gases are water vapour, carbon dioxide, nitrogen, sulphur compounds, chlorine, hydrogen and argon.

1.7.2Intrusive (Plutonic) Landforms

  1. When magma cools inside the crust it forms plutonic or intrusive landforms. The largest is the batholith, a huge dome-shaped mass of granite.
  2. A laccolith is a dome-shaped body that pushes the overlying layers up, and a lapolith is saucer-shaped. A phacolith is a wavy mass found in the crests or troughs of folds.
  3. Sills (or sheets) are horizontal sheets of magma between rock layers. Dykes are vertical walls of magma that cut across the layers.

1.7.3Types of Volcanoes

  1. Flood basalt (lava plateau) eruptions pour out very fluid lava from fissures over huge areas. India's Deccan Traps formed this way as India passed over the Réunion hotspot, giving rise to the black regur soils.
  2. Shield volcanoes are built of basaltic lava with little silica, so the lava flows far and forms gentle slopes. The Hawaiian volcanoes Mauna Loa and Mauna Kea are the best examples, and they turn explosive only when water enters the vent.
  3. Cinder cones are small, steep cones built of loose fragments thrown out in explosive bursts. Parícutin in Mexico, which rose from a cornfield in 1943, is a classic example.
  4. Composite (strato) volcanoes erupt cooler, more viscous andesitic lava together with ash, building steep cones in layers. Examples are Mount Fuji, Mount Vesuvius near Naples and Stromboli in the Tyrrhenian Sea, Italy.
  5. Calderas are the most explosive type, where the volcano collapses into its own emptied magma chamber. The resulting depression is a caldera, as at Krakatoa in Indonesia.
    • India's Lonar Lake in Maharashtra is often confused with a caldera. It is in fact a meteorite impact crater in basalt rock.

1.7.4Geysers and Hot Springs

  1. Geysers are fountains of hot water and steam that erupt at intervals from a shallow magma source. Yellowstone National Park in the USA is the best-known geyser field, and dissolved silica gives the pools their colours.
  2. Hot springs form where groundwater sinks deep enough to be heated by the interior and returns to the surface. They are more common than geysers, carry minerals said to be good for health, get their colours from cyanobacteria, and have geothermal energy potential.

1.7.5Distribution of Volcanism

  1. Volcanoes are linked with plate movement rather than being random. At ocean–ocean convergence they form volcanic island arcs, and at ocean–continent convergence they form volcanic mountains along the coast.
  2. Mediterranean volcanism results from the break-up of small plates in the Mediterranean, a remnant of the Tethys Sea. It produces frequent minor earthquakes and andesitic eruptions.
  3. Hotspot volcanoes form over fixed mantle plumes, as in Hawaii and Iceland. A chain of hotspot islands shows the direction of plate movement.
RECALL ANCHOR
  1. Intrusive: batholith, laccolith, lapolith, phacolith, sill, dyke.
  2. Gentle → steep: shield → composite → cinder; most explosive: caldera.
MIX-UP ALERT
  1. Lonar is a meteorite crater, not a volcanic caldera; Parícutin is a cinder cone, not a caldera.
  2. Kamchatka and the Aleutians are subduction volcanoes, not hotspots; Hawaii and Iceland are hotspot examples.
EXAM TRAIL
  1. Likely angle: match volcanic landforms with their shapes or examples.

1.8Minerals and Rocks

The rock cycle
The rock cycle

1.8.1Minerals and their Properties

  1. A mineral is a naturally occurring substance with a definite physical and chemical composition. Most contain two or more elements, but some, such as copper, sulphur, gold and silver, occur alone.
  2. Minerals are identified by cleavage (the shape in which they break), fracture (irregular breaking), streak (colour of the powder) and hardness. On the hardness scale talc is softest and diamond hardest, and specific gravity compares a mineral's weight with that of an equal volume of water.

1.8.2Important Rock-forming Minerals (FQPAMO)

  1. Feldspar is made of silicon and oxygen with other elements and forms about half of the crust. It is used for ceramics and glass.
  2. Quartz is made of silica and is a key part of granite. It is used in radio and radar equipment.
  3. Pyroxene is found in meteorites and basic rocks. Amphibole forms about 7% of the crust; hornblende is a common form and asbestos is fibrous amphibole.
  4. Mica occurs in igneous and metamorphic rocks and splits into very thin sheets. Olivine is found in basic magma-derived rocks and its gem form is used in jewellery.

1.8.3Igneous Rocks

  1. Igneous rocks form from cooling magma or lava and have a crystalline structure with no fossils and no layers. Slow cooling deep underground gives large crystals, and quick cooling at the surface gives small ones.
  2. Examples are granite, gabbro and pegmatite (intrusive) and basalt and tuff (extrusive). The notebook also listed dolomite and breccia, but these are sedimentary rocks.

1.8.4Sedimentary Rocks

  1. Sedimentary rocks form by lithification of sediments laid down by agents of denudation. They are layered, often contain fossils, and are not crystalline.
  2. Mechanically formed sedimentary rocks include sandstone, shale and loess. Organically formed ones include chalk, coal and geyserite, and chemically formed ones include limestone, halite, potash and gypsum.

1.8.5Metamorphic Rocks

  1. Metamorphic rocks form when existing rocks are changed by heat and pressure. Dynamic metamorphism is change by pressure without much chemical change, while thermal metamorphism involves recrystallisation by heat.
  2. Regional metamorphism occurs over wide areas through tectonic shearing, and contact metamorphism occurs next to hot intruding magma. Minerals often line up in bands, called foliation, and alternate coloured layers are called banding.
  3. Common changes are clay → slate, shale → schist, limestone → marble and sandstone → quartzite. Likewise granite → gneiss and coal → graphite.
RECALL ANCHOR
  1. Clay → slate; shale → schist; limestone → marble; sandstone → quartzite; granite → gneiss; coal → graphite.
MIX-UP ALERT
  1. Sandstone becomes quartzite, not "quartz"; quartz is a mineral.
  2. Dolomite and breccia are sedimentary, not igneous.
EXAM TRAIL
  1. Likely angle: match rocks with their metamorphic forms, or classify rocks by origin.

1.9Continental Drift, Sea-floor Spreading and Plate Tectonics

Major lithospheric plates and their boundaries
Major lithospheric plates and their boundaries
Movement of the Indian plate from 71 million years ago to the present
Movement of the Indian plate from 71 million years ago to the present
Divergent, convergent and transform plate boundaries
Divergent, convergent and transform plate boundaries

1.9.1Continental Drift Theory

  1. Early ideas that the continents were once joined came from Abraham Ortelius and Antonio Pellegrini. Alfred Wegener set out the full Continental Drift theory in 1912.
  2. Wegener said all continents formed one landmass, Pangaea, surrounded by one ocean, Panthalassa. About 200 million years ago Pangaea split into Laurasia in the north and Gondwanaland in the south, which later broke into today's continents.

1.9.2Evidence for Drift

  1. The jigsaw fit of coastlines, especially South America and Africa, suggests they were once joined. Tillite, a glacial sediment, is found in India, the Falkland Islands, Africa, Madagascar, Australia and Antarctica, showing a common past climate.
  2. Radiometric dating shows matching rock formations on continents now separated by oceans. Placer gold in Ghana appears to have come from source rocks now found in Brazil.
  3. Fossils match across oceans, such as lemurs in India, Madagascar and Africa (the "Lemuria" idea) and the reptile Mesosaurus in South Africa and Brazil. Mesosaurus was too small to swim across an ocean.
  4. Wegener suggested tidal forces and the rotation of the Earth (pole-fleeing force) moved the continents. These forces were too weak, which is why the theory was not accepted at first.

1.9.3Convection Current Theory

  1. Arthur Holmes proposed in the 1930s that radioactive heat in the mantle sets up convection currents. These currents could move the continents, supplying the missing force.

1.9.4Sea-floor Spreading (Harry Hess)

  1. Harry Hess showed that volcanism at mid-ocean ridges brings up new lava that pushes the ocean floor apart. Rocks on both sides of a ridge match in polarity, chemistry and age.
  2. Rocks grow older away from the ridge, and the ocean crust is much younger than the continents, never older than about 200 million years. Sediments are thin, and the old ocean floor is consumed at trenches, where deep earthquakes occur, while ridges have shallow ones.

1.9.5Palaeomagnetism

  1. When lava cools at a ridge, its iron minerals record the Earth's magnetic polarity at that time. The ocean floor shows parallel stripes of normal and reversed polarity on both sides of the ridge.
  2. The Indian Ocean ridge near India is the Carlsberg Ridge. The age of the stripes shows that spreading is fastest in the Pacific and slowest in the Atlantic.

1.9.6Plate Tectonics

  1. The Plate Tectonics theory (McKenzie, Parker and Morgan, 1967) states that the lithosphere is broken into rigid plates that move over the asthenosphere. Pangaea itself was only one stage in this long, continuing process.
  2. The seven major plates are the North American, South American, Pacific, Indo-Australian, African, Eurasian and Antarctic plates. Minor plates include the Caribbean, Nazca, Cocos, Arabian, Philippine, Caroline and Fiji plates.
  3. Plates meet at convergent (destructive), divergent (constructive) and transform (conservative) boundaries. Most earthquakes, volcanoes and fold mountains occur along these boundaries.
RECALL ANCHOR
  1. Pangaea → Laurasia + Gondwanaland (~200 million years ago); ocean Panthalassa.
  2. Drift: Wegener; convection: Holmes; sea-floor spreading: Hess.
  3. Fastest spreading: Pacific; slowest: Atlantic; Indian Ocean ridge: Carlsberg.
MIX-UP ALERT
  1. Continental drift vs plate tectonics: drift moved continents only; plate tectonics moves whole lithospheric plates, including ocean floor.
EXAM TRAIL
  1. Likely angle: evidence for drift and the properties of the ocean floor near ridges.

1.10Mountains, Plateaus and Plains

1.10.1Mountains

  1. A mountain is a large landform that rises well above its surroundings, usually with steep slopes and a small summit. Mountains form through tectonic movement or as residual remnants of erosion.
  2. Fold mountains form when layers of rock are compressed and folded into anticlines (upfolds) and synclines (downfolds), shortening the crust. They often contain marine sediments from a geosyncline and may have volcanic peaks where an ocean plate sinks under a continent.
  3. Block mountains form by faulting rather than folding. A raised block is a horst and a sunken block a graben, as in the Black Forest of Germany and the Vosges of France beside the Rhine rift.
  4. Volcanic mountains are built by the accumulation of lava and ash, as in Kilimanjaro and Fuji. Residual mountains are what remain after long denudation of the surrounding land, such as the Scandinavian Highlands and the Aravallis.

1.10.2Plateaus

  1. A plateau is a highland with an extensive, fairly level top. Plateaus may be tectonic (intermontane), volcanic such as the Deccan, dissected into deep canyons, or residual.

1.10.3Plains

  1. Plains are low, flat lands that are the best areas for human settlement and farming. The most densely populated regions of the world lie on river flood plains.
  2. Structural plains are raised sea floors undisturbed by tectonic forces, and depositional plains are built by rivers, wind or glaciers. Erosional plains, worn down by long erosion, are called peneplains.
RECALL ANCHOR
  1. Fold: anticline + syncline; block: horst + graben.
  2. Plains: structural, depositional, erosional (peneplain).
MIX-UP ALERT
  1. Horst vs graben: a horst is a raised block mountain; a graben is a sunken rift valley.
EXAM TRAIL
  1. Likely angle: classify mountains by origin with examples.

1.11Geological Time Scale

Eons, eras and periods with dates, mass extinctions, the Anthropocene debate, and Indian and Rajasthan stratigraphy mapped to the scale.

1.11.1The Architecture of Geological Time

  1. The geological time scale (GTS) is a hierarchical, globally correlated calendar of Earth history built by the International Commission on Stratigraphy (ICS) and ratified by the International Union of Geological Sciences (IUGS). Its hierarchy runs Eon > Era > Period > Epoch > Age, with the Phanerozoic subdivided into Palaeozoic, Mesozoic and Cenozoic eras, and each era into periods. The current chart (v2023/09, in use through 2025-26) fixes the base of the Phanerozoic at 538.8 Ma and the base of the Ediacaran at 635 Ma.
    • (a) Eons: Hadean, Archean, Proterozoic, Phanerozoic - the last covers barely 12 per cent of Earth history but nearly all fossils.
    • (b) Eras of the Phanerozoic: Palaeozoic (538.8-251.9 Ma), Mesozoic (251.9-66 Ma), Cenozoic (66 Ma-present).
    • (c) Periods: Cambrian to Permian (Palaeozoic), Triassic, Jurassic, Cretaceous (Mesozoic), Palaeogene, Neogene, Quaternary (Cenozoic).
  2. The Hadean Eon (c. 4,600-4,000 Ma) is named after Hades and is known almost entirely from zircon crystals rather than rock sequences. The oldest dated terrestrial material is the Jack Hills zircon of Western Australia at about 4,400 Ma, and the oldest intact rocks are the Acasta Gneiss of Canada (c. 4,030 Ma). The Late Heavy Bombardment around 4,100-3,800 Ma and formation of the Moon by a giant impact (c. 4,500 Ma) belong here; no uncontested life record exists.
    • (a) Earth's differentiation into core, mantle and crust, and outgassing that built the early atmosphere and oceans.
    • (b) The Acasta Gneiss and Nuvvuagittuq greenstone belt are the standard Hadean-Eoarchean reference sites.
  3. The Archean Eon (4,000-2,500 Ma) saw the first continents (cratons), the first prokaryotic life, and the first banded iron formations (BIFs). Stromatolites from the Pilbara (Australia) and Barberton (South Africa) record cyanobacterial mats by about 3,500-3,400 Ma. The Great Oxidation Event (GOE) at roughly 2,400-2,300 Ma, in the early Proterozoic, raised atmospheric oxygen and triggered iron precipitation in BIFs and the first Huronian glaciation.
    • (a) Archean crust is dominated by tonalite-trondhjemite-granodiorite (TTG) gneisses and greenstone belts.
    • (b) The Isua supracrustal belt (Greenland, c. 3,800 Ma) gives the earliest chemical traces of life.
  4. The Proterozoic Eon (2,500-538.8 Ma) is divided into the Palaeoproterozoic, Mesoproterozoic and Neoproterozoic eras and is the age of eukaryotes, sexual reproduction and the first metazoans. The 'Boring Billion' (c. 1,800-800 Ma) was a period of climatic and evolutionary stability, followed by the Cryogenian glaciations (c. 720-635 Ma) - the 'Snowball Earth' episodes. The Ediacaran Period (635-538.8 Ma) preserves the first large soft-bodied animals such as Dickinsonia and Spriggina.
    • (a) The Great Oxidation Event and later Neoproterozoic Oxygenation Event shaped animal evolution.
    • (b) Rodinia broke up around 750 Ma, and Gondwana assembled by about 550-500 Ma.

1.11.2The Phanerozoic: Eras and Periods

  1. The Palaeozoic Era (538.8-251.9 Ma) opened with the Cambrian Explosion (c. 538-520 Ma), when hard-shelled marine animals and most modern phyla appear in the fossil record. The Cambrian is followed by the Ordovician (485.4-443.8 Ma), Silurian (443.8-419.2 Ma), Devonian (419.2-358.9 Ma), Carboniferous (358.9-298.9 Ma) and Permian (298.9-251.9 Ma). Key events include the first land plants (Ordovician-Silurian), first forests and amphibians (Devonian), and coal-forming swamps (Carboniferous).
    • (a) The Caledonian and Hercynian (Variscan) orogenies built the Laurussia and Pangaea landmasses.
    • (b) The Permo-Carboniferous glaciation left tillites across Gondwana, including India's Talchir beds.
  2. The Mesozoic Era (251.9-66 Ma) - the age of reptiles and dinosaurs - comprises the Triassic (251.9-201.4 Ma), Jurassic (201.4-145 Ma) and Cretaceous (145-66 Ma) periods. Pangaea began to rift in the Triassic, the Atlantic opened in the Jurassic, and the Cretaceous saw high sea levels, chalk seas, and the angiosperm radiation. The era ended with the Chicxulub impact (c. 66 Ma) and the K-Pg extinction.
    • (a) Break-up of Gondwana separated India, Madagascar, Africa, Antarctica and Australia through the Cretaceous.
    • (b) Deccan Trap volcanism straddles the Cretaceous-Palaeogene boundary around 66 Ma.
  3. The Cenozoic Era (66 Ma-present) is divided into the Palaeogene (66-23.03 Ma), Neogene (23.03-2.58 Ma) and Quaternary (2.58 Ma-present) periods. It is the age of mammals, grasses, primates and humans, and of the Alpine-Himalayan and Andean orogenies. The Palaeocene-Eocene Thermal Maximum (PETM, c. 56 Ma) was a rapid warming event, while the Eocene-Oligocene transition (c. 34 Ma) brought Antarctic glaciation.
    • (a) Palaeogene epochs: Palaeocene, Eocene, Oligocene; Neogene epochs: Miocene, Pliocene.
    • (b) Quaternary epochs: Pleistocene (2.58-0.0117 Ma) and Holocene (11,700 years ago to present).
EonEraPeriodBegan (Ma)Key events
Hadean--c. 4,600Moon-forming impact; core-mantle differentiation; oldest zircons (Jack Hills, 4,400 Ma)
Archean--4,000First cratons; first prokaryotes and stromatolites; BIFs; TTG gneisses
Proterozoic--2,500GOE (c. 2,400 Ma); eukaryotes; Snowball Earth; Ediacaran fauna
PhanerozoicPalaeozoicCambrian538.8Cambrian Explosion; hard-shelled marine life
PhanerozoicPalaeozoicOrdovician485.4First land plants; end-Ordovician glaciation and extinction
PhanerozoicPalaeozoicSilurian443.8Vascular plants; jawed fishes
PhanerozoicPalaeozoicDevonian419.2First forests, amphibians, insects; Late Devonian extinction
PhanerozoicPalaeozoicCarboniferous358.9Coal swamps; first reptiles; Pangaea assembling
PhanerozoicPalaeozoicPermian298.9Pangaea complete; end-Permian mass extinction (c. 251.9 Ma)
PhanerozoicMesozoicTriassic251.9Dinosaurs and mammals appear; Pangaea rifting begins
PhanerozoicMesozoicJurassic201.4Atlantic opens; large dinosaurs; ammonites
PhanerozoicMesozoicCretaceous145Angiosperms; Deccan Traps; K-Pg extinction (66 Ma)
PhanerozoicCenozoicPalaeogene66Mammal radiation; PETM; Himalayan orogeny begins
PhanerozoicCenozoicNeogene23.03Grasslands; hominins; Antarctic ice sheet
PhanerozoicCenozoicQuaternary2.58Pleistocene glaciations; Holocene; Homo sapiens

1.11.3Mass Extinctions

  1. The 'Big Five' mass extinctions are the end-Ordovician (c. 443 Ma), Late Devonian (c. 372 Ma), end-Permian (c. 251.9 Ma), end-Triassic (c. 201.4 Ma) and end-Cretaceous (K-Pg, 66 Ma) events. The end-Permian event, the 'Great Dying', eliminated roughly 80-90 per cent of marine species and was linked to Siberian Traps volcanism, ocean anoxia and methane release. The K-Pg event killed non-avian dinosaurs and about 75 per cent of species, linked to the Chicxulub impact and Deccan volcanism.
    • (a) End-Ordovician: Gondwana glaciation and sea-level fall.
    • (b) Late Devonian: anoxia and reef collapse, cause debated.
    • (c) End-Triassic: Central Atlantic Magmatic Province volcanism.
  2. Extinction mechanisms fall into bolide impact, large igneous province (LIP) volcanism, rapid climate change, ocean acidification and anoxia, and sea-level change. The K-Pg boundary is marked worldwide by an iridium anomaly, shocked quartz and microtektites, first documented at Gubbio, Italy. The current sixth mass extinction is attributed to habitat loss, overexploitation, invasive species and climate change, with extinction rates far above the background fossil rate.
    • (a) Background extinction is continuous and low; mass extinction is geologically abrupt and broad-taxon.
    • (b) Deccan Traps volcanism (c. 66 Ma) is debated as a contributor to, or accelerator of, the K-Pg crisis.

1.11.4Evolution of Life and Climate Through Time

  1. Life evolved from prokaryotes (Archean) to eukaryotes (Proterozoic), multicellular Ediacaran organisms, Cambrian shelly faunas, fish (Ordovician-Devonian), amphibians and reptiles (Carboniferous-Permian), dinosaurs (Mesozoic), mammals (Cenozoic) and hominins (late Neogene-Quaternary). Homo sapiens appears in Africa around 300,000 years ago, with the Out of Africa dispersal in the Late Pleistocene. Flowering plants radiated in the Cretaceous, and C4 grasses expanded in the late Miocene.
    • (a) Oxygenation events (GOE, Neoproterozoic) were prerequisites for complex life.
    • (b) Mass extinctions reset evolutionary trajectories, e.g. mammal radiation after K-Pg.
  2. Earth's climate has oscillated between greenhouse and icehouse states. Icehouse episodes include the Huronian (c. 2,400 Ma), Cryogenian Snowball Earth (c. 720-635 Ma), Late Ordovician, Permo-Carboniferous and the Late Cenozoic Quaternary glaciations. Greenhouse episodes include the Cretaceous and the PETM (c. 56 Ma). The Quaternary is marked by Milankovitch cycles - eccentricity, obliquity and precession - driving glacial-interglacial alternation.
    • (a) Marine Isotope Stages and ice cores (Vostok, EPICA) reconstruct Quaternary climate.
    • (b) The Last Glacial Maximum (c. 26,500-19,000 years ago) lowered sea level by about 120 m.

1.11.5The Quaternary and the Anthropocene Debate

  1. The Quaternary Period (2.58 Ma-present) comprises the Pleistocene (2.58-0.0117 Ma) and Holocene (11,700 years ago-present) epochs. The Pleistocene saw repeated continental glaciations, megafaunal extinctions and hominin evolution. The Holocene provided the stable climate in which agriculture and civilisation arose after the Younger Dryas cold snap (c. 12,900-11,700 years ago).
    • (a) The base of the Holocene is fixed at the NorthGRIP ice core horizon (c. 11,700 years ago).
    • (b) The Anthropocene was proposed as a new epoch, not an era.
  2. The Anthropocene concept, popularised by Crutzen and Stoermer (2000), argues that human activity has become a geological force. The Anthropocene Working Group (AWG) proposed Crawford Lake, Canada, as the GSSP with a mid-20th-century 'Great Acceleration' start (c. 1950), marked by plutonium fallout, microplastics and fly ash. In March 2024 the IUGS rejected the Anthropocene as a formal epoch, while recognising it as an event; the debate continues through 2025-26.
    • (a) Alternative start dates: early Holocene agriculture, 1610 Orbis spike, Industrial Revolution (c. 1800).
    • (b) Critics note the Holocene is geologically too short to close; proponents stress the stratigraphic signal.

1.11.6Indian Stratigraphy Mapped to the Scale

  1. India's Archaean basement is dominated by gneisses and granites of the Dharwar craton (Karnataka), Bundelkhand craton, Singhbhum craton and Aravalli craton. The Dharwar Supergroup (c. 3,000-2,600 Ma) includes greenstone belts with banded iron formations and gold (Kolar). The Archaean gneisses form the basement on which all later Indian sequences rest.
    • (a) Peninsular gneiss (c. 3,300-3,000 Ma) is the oldest widespread Indian rock.
    • (b) Dharwar rocks host manganese, iron and gold.
  2. The Proterozoic of India is represented by the Cuddapah Supergroup (c. 2,000-1,600 Ma) and the Vindhyan Supergroup (c. 1,700-600 Ma). The Cuddapah is a Purana basin sequence of quartzites, shales and limestones with stromatolites; the Vindhyan is a vast intracratonic basin spanning Rajasthan, Madhya Pradesh and Uttar Pradesh, famous for diamond-bearing conglomerates (Panna) and the Bhander and Kaimur formations. The Delhi Supergroup (c. 1,100-700 Ma) records Aravalli-Delhi orogeny and hosts zinc-lead (Zawar).
    • (a) Cuddapah and Vindhyan are classic Purana basins; the Vindhyan is largely undeformed.
    • (b) The Malani Igneous Suite (c. 750 Ma) is a bimodal volcanic-plutonic province in western Rajasthan.
  3. The Palaeozoic of India is dominated by the Gondwana Supergroup (c. 300-150 Ma), a fluvio-glacial to coal-bearing sequence in Peninsular India. The Talchir tillites record Permo-Carboniferous glaciation; Barakar and Raniganj beds host India's Gondwana coalfields (Jharia, Raniganj, Korba). The Mesozoic includes the Jurassic of Jaisalmer (Jaisalmer Formation) with ammonites, and the Cretaceous Deccan Traps (c. 66 Ma) covering about 500,000 sq km in Maharashtra, Gujarat and Madhya Pradesh.
    • (a) Gondwana plant fossils (Glossopteris) support continental drift.
    • (b) Deccan Traps are flood basalts linked to the Réunion hotspot.
  4. The Cenozoic of India is recorded in the Himalayan foreland: the Siwaliks (c. 2.6 Ma-0.6 Ma) with vertebrate fossils (Ramapithecus, Sivapithecus), and the Indo-Gangetic alluvium of the Quaternary. The Himalayan orogeny began around 50 Ma with India-Eurasia collision, and the Siwalik molasse records its erosion. The alluvium is divided into Bhangar (older) and Khadar (newer).
    • (a) Siwaliks are the outermost Himalayan range, thrust over the Indo-Gangetic plain.
    • (b) Alluvium covers the Punjab, Haryana, Uttar Pradesh, Bihar and Bengal plains.
Indian unitGeological ageEon/EraRajasthan exampleEconomic note
Archaean gneissc. 3,300-2,500 MaArcheanBanded Gneissic Complex (BGC)Basement; building stone
Aravalli Supergroupc. 2,200-1,600 MaPalaeoproterozoicUdaipur, RajsamandPhosphorite, marble
Delhi Supergroupc. 1,100-700 MaMesoproterozoic-NeoproterozoicKhetri, ZawarCopper, zinc-lead
Malani Igneous Suitec. 750 MaNeoproterozoicJodhpur, Barmer, JaisalmerGranite, rhyolite; uranium
Vindhyan Supergroupc. 1,700-600 MaProterozoicHadoti (Kota-Bundi-Jhalawar)Limestone, sandstone
Gondwana Supergroupc. 300-150 MaPalaeozoic-MesozoicPalana (Bikaner)Lignite, clay
Jurassic of Jaisalmerc. 200-145 MaMesozoicJaisalmerAmmonites; hydrocarbon exploration
Deccan Trapsc. 66 MaCretaceous-PalaeogeneSirohi, Jalore (peripheral)Basalt; building stone
Siwaliksc. 2.6-0.6 MaNeogene-QuaternaryNot in RajasthanVertebrate fossils
AlluviumQuaternaryQuaternaryGanganagar, HanumangarhFertile soils; groundwater

1.11.7Rajasthan Through the Geological Scale

  1. The Aravalli-Delhi orogenic belt is India's oldest fold mountain system, with the Aravalli Supergroup (c. 2,200-1,600 Ma) and the Delhi Supergroup (c. 1,100-700 Ma) recording multiple orogenic cycles. The Aravalli trend is NE-SW, and the belt hosts zinc-lead at Zawar, copper at Khetri and marble at Makrana. The Great Boundary Fault separates the Aravalli from the Vindhyan of the Hadoti region.
    • (a) Aravalli rocks are metasediments with gneisses and schists.
    • (b) Delhi Supergroup is younger and more deformed than the Aravalli.
  2. The Malani Igneous Suite (c. 750 Ma) is a Neoproterozoic anorogenic province of bimodal volcanics - rhyolite, granite, trachyte and basalt - spread over Jodhpur, Barmer, Jaisalmer and Sirohi. It is named after Malani village in Jodhpur district and is associated with uranium and rare-earth mineralisation. The Vindhyan of Hadoti (Kota, Bundi, Jhalawar) is a Proterozoic sequence of sandstone, shale and limestone with stromatolites and rock-shelter sites.
    • (a) Malani is anorogenic, unlike the orogenic Aravalli-Delhi belt.
    • (b) Hadoti Vindhyan limestone supports the cement industry of Kota and Chittorgarh.
  3. The Jurassic of Jaisalmer is the only well-developed marine Jurassic sequence in Rajasthan, with ammonites, belemnites and bivalves in the Jaisalmer Formation. It records the Tethyan sea incursion into the western Indian shelf and is important for hydrocarbon exploration in the Barmer-Sanchor basin. The Palana and Kapurdi lignite deposits of Bikaner belong to the Palaeogene and are mined for lignite-based power.
    • (a) Jaisalmer also has Cretaceous and Palaeogene sequences above the Jurassic.
    • (b) Barmer hosts oil (Mangala field) in Cretaceous-Palaeogene reservoirs.

1.11.8How the Scale is Dated

  1. Radiometric dating uses the decay of radioactive isotopes at known rates: U-Pb on zircons (most reliable for old rocks), K-Ar and Ar-Ar on volcanics, Rb-Sr on granites, and C-14 for organic material younger than about 50,000 years. Zircon U-Pb dating underpins the ICS chart, and astrochronology (orbital tuning) refines the Cenozoic. Fission-track and luminescence dating extend coverage to Quaternary sediments.
    • (a) Half-life is the key parameter; closure temperature determines reliability.
    • (b) C-14 is useless for dinosaur-age rocks; U-Pb is used instead.
  2. Biostratigraphy uses index fossils - trilobites (Cambrian), ammonites (Jurassic-Cretaceous), foraminifera (Cretaceous-Cenozoic) and pollens - to correlate strata globally. Lithostratigraphy maps rock units, chronostratigraphy maps time units, and magnetostratigraphy uses palaeomagnetic reversals. Sequence stratigraphy links sea-level cycles to global correlation.
    • (a) Index fossils must be short-ranging and widely distributed.
    • (b) Foraminifera are the workhorse of Cenozoic correlation.
  3. A GSSP (Global Boundary Stratotype Section and Point), or 'golden spike', is the physically marked reference point in a rock section that defines a stage boundary. The ICS ratifies GSSPs; the base of the Ediacaran is at Enorama Creek, Australia, and the base of the Holocene at the NorthGRIP ice core. Where no GSSP exists, a GSSA (Global Standard Stratigraphic Age) - a numerical age - is used, as for the base of the Archean.
    • (a) Golden spikes must be accessible, complete and fossiliferous.
    • (b) GSSA is used for Precambrian boundaries where correlation is difficult.
RECALL ANCHOR
  1. Hadean-Archean-Proterozoic-Phanerozoic: 4,600-4,000-2,500-538.8 Ma.
  2. Palaeozoic-Mesozoic-Cenozoic: 538.8-251.9-66 Ma.
  3. Big Five: Ordovician, Devonian, Permian, Triassic, Cretaceous.
  4. India: Dharwar-Cuddapah-Vindhyan-Gondwana-Deccan-Siwalik-Alluvium.
  5. Rajasthan: Aravalli-Delhi-Malani-Vindhyan (Hadoti)-Jaisalmer Jurassic.
  6. Golden spike = GSSP; numerical age = GSSA.
MIX-UP ALERT
  1. Aravalli vs Delhi Supergroup: Aravalli is older (c. 2,200-1,600 Ma) and less deformed; Delhi is younger (c. 1,100-700 Ma) and hosts Khetri copper.
  2. Cuddapah vs Vindhyan: both are Purana basins, but Cuddapah is older (c. 2,000-1,600 Ma) and in Andhra Pradesh, while Vindhyan (c. 1,700-600 Ma) spans Rajasthan-MP-UP.
  3. Anthropocene vs Holocene: Holocene is a formal epoch from 11,700 years ago; Anthropocene was rejected as an epoch by IUGS in 2024 and is treated as an event.
  4. K-Pg vs end-Permian: K-Pg (66 Ma) killed dinosaurs via Chicxulub impact; end-Permian (251.9 Ma) was the 'Great Dying' linked to Siberian Traps.
EXAM TRAIL
  1. RAS has asked about Rajasthan's geological formations and mineral belts; link Aravalli-Delhi, Malani and Vindhyan to the GTS.
  2. UPSC Prelims has tested period-era matching and mass extinction causes; expect a table-based question.
  3. Likely angle: Anthropocene debate and GSSP as a current-affairs-geology crossover.
  4. Likely angle: Indian stratigraphy mapped to eons and eras in a 15-mark Mains answer.

1.12Types of Earthquakes and Their World Distribution

A complete treatment of earthquake classification by cause, depth and magnitude, the three global seismic belts, India's zones and Rajasthan's position.

1.12.1Classification by Cause: Tectonic Earthquakes

  1. Tectonic earthquakes are by far the most numerous and destructive class, generated when accumulated elastic strain in the lithosphere is suddenly released along a fault, radiating energy as seismic waves. They account for roughly 90 per cent or more of all recorded earthquakes and virtually all great earthquakes. The mechanism is explained by the Elastic Rebound Theory of H. F. Reid (1910), formulated after the 1906 San Francisco earthquake, which holds that rock on either side of a fault deforms slowly, then snaps back to an undeformed position once friction is overcome. Tectonic quakes occur at all three plate boundaries: divergent (mid-oceanic ridges, shallow), convergent (subduction zones, shallow to deep) and transform (shallow, strike-slip).
    • (a) Interplate quakes occur on the boundary faults between plates, e.g. the San Andreas Fault and the Himalayan Frontal Thrust.
    • (b) Intraplate quakes occur far from plate margins along reactivated ancient faults, e.g. Koyna (India), New Madrid (USA, 1811-12) and Bhuj (2001).
    • (c) Focal mechanism studies (fault-plane solutions) tell whether motion was dip-slip, strike-slip or thrust, which guides hazard assessment.
  2. Volcanic earthquakes are associated with magma movement, gas pressure and fracturing of rock beneath and around a volcano. They are usually of low magnitude (mostly below 5) and shallow focus, but they serve as valuable precursors to eruptions, so volcanologists use them for forecasting. Two sub-types are recognised: volcano-tectonic quakes, caused by faulting as magma intrudes and inflates the edifice, and long-period (harmonic tremor) events, caused by fluid movement. They are concentrated along volcanic arcs of the Circum-Pacific belt (Japan, Indonesia, Andes) and at hotspots such as Hawaii and Iceland, and are locally hazardous but rarely regional disasters.
  3. Collapse earthquakes (also called subsidence earthquakes) are minor shocks produced when the roof of a cave, cavern, mine working or underground solution cavity gives way. They are typically very shallow and of low magnitude (below 4), and their damage is confined to a small area. Classic examples come from karst limestone regions, such as the sinkhole districts of Florida and Kentucky (USA), and from old coal-mining belts where abandoned galleries collapse. In India they are reported from coal fields of Jharia and Raniganj and from limestone caverns. Their importance lies in the fact that they are anthropogenic or lithological rather than tectonic, and are often confused with genuine tectonic tremors by local residents.
  4. Explosion earthquakes are artificial shocks generated by the detonation of explosives, most commonly in quarrying, mining, tunnelling, dam construction and underground nuclear tests. They are shallow, of small to moderate magnitude, and are distinguished from natural quakes by their sharp onset and rapid decay. Notable cases include the underground nuclear tests at Pokhran (Rajasthan, 1974 and 1998), which registered on distant seismographs, and the numerous quarry blasts in the Aravalli and Bundelkhand stone belts. Seismological stations routinely discriminate them using the ratio of P-wave to S-wave energy and the shallowness of the source.
  5. Reservoir-induced seismicity (RIS) occurs when the impoundment of a large reservoir changes the stress regime and pore pressure in the underlying rock, triggering slip on pre-existing faults. The mechanism involves (a) the weight of the water column adding load, (b) increased pore pressure reducing effective normal stress and hence friction, and (c) water infiltration lubricating fault planes. The type example is Koyna, Maharashtra, where impoundment of the Koyna dam in 1962 was followed by increasing seismicity and the damaging M 6.3 earthquake of 10 December 1967, which killed over 150 people and led to a long-lived earthquake sequence still monitored today. Other Indian cases include Bhatsa, Warna and Idukki; globally, Hoover Dam (USA), Kariba (Zambia-Zimbabwe) and Kremasta (Greece) are cited.
  6. Mining-induced and fracking-induced earthquakes are a distinct class of anthropogenic seismicity. In deep mining, removal of ore creates voids and stress redistribution, producing rockbursts and tremors, as in the Kolar Gold Fields (Karnataka) and the Ruhr coalfield (Germany). In hydraulic fracturing (fracking) and wastewater injection, high-pressure fluid raises pore pressure along nearby faults, triggering quakes; the Oklahoma (USA) sequence since about 2009, linked to disposal-well injection, is the best-documented case, with magnitudes reaching about 5.8. In India, fracking is still limited, but coal-bed methane and shale exploration in the Cambay and Gondwana basins raises the same concern.

1.12.2Classification by Depth of Focus

  1. The depth of focus (hypocentre) is the point within the earth where rupture begins; the point vertically above it on the surface is the epicentre. Depth controls the area over which shaking is felt and the severity of damage. Three classes are conventionally recognised: shallow-focus (0-70 km), intermediate-focus (70-300 km) and deep-focus (300-700 km). About three-quarters of all earthquakes are shallow-focus, and these cause the greatest destruction because the energy reaches the surface with least attenuation.
  2. Shallow-focus earthquakes (0-70 km) dominate at mid-oceanic ridges and transform faults and in continental crust, and include most damaging events such as Bhuj 2001 (about 16 km), Koyna 1967 (about 10 km) and Latur 1993 (about 10 km). Because the source is close to the surface, the felt area is small but the intensity is high, and surface rupture may occur. Shallow quakes are also the ones most likely to generate tsunamis when they occur under the ocean floor with vertical displacement, as at Sumatra 2004 and Tohoku 2011.
  3. Intermediate-focus earthquakes (70-300 km) occur almost exclusively within subducting slabs, where the descending plate is still brittle enough to fracture. They are characteristic of the Mediterranean-Himalayan belt and parts of the Circum-Pacific, e.g. beneath the Hindu Kush and Andes. Because of greater depth, the surface shaking is weaker and more widespread, so damage is usually moderate; but they can still be damaging in poorly built cities, and they help seismologists map the geometry of the subducting slab.
  4. Deep-focus earthquakes (300-700 km) occur only in subduction zones, where cold, brittle slab material survives to great depth. The Wadati-Benioff zone is the inclined plane of foci that defines the descending slab, and its dip can be read from the depth distribution of quakes. Deep-focus quakes are rarely damaging at the surface because energy is absorbed over a long path, but they are scientifically important: the deepest reliably recorded events reach about 700 km, beyond which rock is too hot and ductile to fracture. Examples occur beneath Japan, Tonga, Fiji and South America.
Depth classRangeTypical settingDamage potentialExample
Shallow-focus0-70 kmRidges, transforms, continental faultsHighest; small area, intense shakingBhuj 2001; Koyna 1967
Intermediate-focus70-300 kmSubducting slab (Hindu Kush, Andes)Moderate; wider felt areaHindu Kush events
Deep-focus300-700 kmDeep subduction (Tonga, Japan)Low at surface; scientific valueTonga-Fiji deep events

1.12.3Classification by Magnitude

  1. The Richter scale, devised by Charles Richter in 1935, is a logarithmic measure of the energy released at the focus, based on the amplitude of seismic waves recorded on a Woods-Anderson seismograph at a standard distance. Each whole number represents about a tenfold increase in wave amplitude and roughly a thirtyfold increase in energy. It is now largely superseded for great earthquakes by the moment magnitude scale (Mw), which measures the seismic moment and does not saturate. Magnitude classes are conventionally given as micro (below 3), minor (3-3.9), light (4-4.9), moderate (5-5.9), strong (6-6.9), major (7-7.9) and great (8 and above).
  2. The intensity scale is a separate, descriptive measure of the effects at a place, not of the source energy. The Modified Mercalli (MM) scale runs from I (not felt) to XII (total destruction), and the MSK-64 scale is widely used in India and Europe. Intensity decreases with distance from the epicentre (isoseismals) and depends on local geology, so a single earthquake has one magnitude but many intensities. India's seismic zoning map is essentially an intensity-based map, and the Bureau of Indian Standards (IS 1893) links zones to design coefficients.
  3. Magnitude and energy are related by the Gutenberg-Richter relation, log N = a - bM, which states that the number of quakes falls exponentially with magnitude; for every great earthquake there are thousands of small ones. The seismic moment (M0 = rigidity x fault area x slip) is the most physically meaningful measure, and Mw is derived from it. A magnitude 8 event releases energy equivalent to many megatonnes of TNT, whereas a magnitude 5 is felt widely but rarely destructive; the energy difference between M 6 and M 8 is roughly a thousandfold.

1.12.4The Three Great World Seismic Belts

  1. The Circum-Pacific belt, often called the 'Ring of Fire', is the most active seismic and volcanic zone on earth, encircling the Pacific Ocean from New Zealand through Japan, the Aleutians, Alaska, the west coast of the Americas and down to Chile. It coincides with convergent and transform plate margins and accounts for roughly 80 per cent of the world's earthquakes and a similar share of its active volcanoes. The belt includes the Pacific Ring's subduction zones (Japan trench, Peru-Chile trench, Tonga-Kermadec) and the San Andreas transform. The great Tohoku (2011), Chile (1960), Alaska (1964) and Sumatra-Andaman (2004) events all lie within or at the edge of this system.
  2. The Mediterranean-Himalayan belt (also called the Alpide belt) runs from the Azores through the Mediterranean, Turkey, Iran, the Himalayas, Myanmar and Indonesia, where it joins the Circum-Pacific system. It is a continent-continent and continent-ocean collision zone, formed by the convergence of Africa and India with Eurasia, and accounts for roughly 15 per cent of the world's earthquakes. It is the belt that governs India's hazard, through the Himalayan arc and its continuation into the Indo-Burma ranges. Major events include Kashmir 2005, Nepal 2015, Bhuj 2001 (intraplate, at the belt's margin) and Turkey-Syria 2023.
  3. The mid-oceanic ridge belt follows the divergent plate boundaries of the global ridge system: the Mid-Atlantic Ridge, East Pacific Rise, Indian Ocean Ridge and Carlsberg Ridge. It accounts for only about 5 per cent of global seismic energy but a very large number of small, shallow-focus events, because the brittle crust there is thin and hot. These quakes are mostly of magnitude below 6 and are detected mainly by ocean-bottom seismographs; the Carlsberg Ridge is the nearest such belt to India. Ridge seismicity is important for understanding sea-floor spreading and for the tsunami risk from ridge-flank faulting.
BeltPlate settingShare of world earthquakesDepth rangeRepresentative events
Circum-Pacific (Ring of Fire)Convergent and transformAbout 80 per centShallow to deep (to 700 km)Chile 1960; Alaska 1964; Tohoku 2011
Mediterranean-Himalayan (Alpide)CollisionAbout 15 per centShallow to intermediateNepal 2015; Turkey-Syria 2023; Bhuj 2001
Mid-oceanic ridgesDivergentAbout 5 per centShallow onlyMid-Atlantic Ridge; Carlsberg Ridge

1.12.5Major Earthquakes of the World and India

  1. The following table summarises great and damaging earthquakes that an examiner expects you to cite, with approximate magnitudes and impacts. Note that pre-instrumental magnitudes are estimates, and casualty figures are order-of-magnitude.
YearPlaceMagnitude (approx.)Impact
1906San Francisco, USA7.9Fire destroyed much of the city; led to Elastic Rebound Theory
1923Kanto, Japan7.9Great Tokyo-Yokohama fire; over 100,000 deaths
1960Valdivia, Chile9.5Largest recorded quake; Pacific-wide tsunami
1964Alaska, USA9.2Tsunami and ground failure; led to modern building codes
1967Koyna, India6.3Reservoir-induced; over 150 deaths; continuing sequence
1976Tangshan, China7.6One of the deadliest; several hundred thousand deaths
1993Latur, India6.2Shallow intraplate; about 10,000 deaths; poor masonry
2001Bhuj, Gujarat7.7About 20,000 deaths; intraplate rift reactivation
2004Sumatra-Andaman9.1Indian Ocean tsunami; over 200,000 deaths across 14 countries
2005Kashmir, India-Pakistan7.6About 75,000 deaths; Himalayan thrust
2011Tohoku, Japan9.0Tsunami and Fukushima nuclear accident
2015Nepal (Gorkha)7.8About 9,000 deaths; Himalayan collision
2023Turkey-Syria7.8Over 50,000 deaths; two major ruptures

1.12.6Seismic Zoning of India and Rajasthan

  1. India's seismic zoning map, published by the Bureau of Indian Standards (IS 1893), divides the country into four zones, II to V, on an intensity basis; Zone I was merged into Zone II in the 2002 revision because no area was found to be truly aseismic. The zones carry effective peak ground acceleration values of roughly 0.10 g (Zone II), 0.16 g (Zone III), 0.24 g (Zone IV) and 0.36 g (Zone V). About 59 per cent of India's land area is prone to moderate to severe earthquakes, and the Himalayan arc is the most hazardous part.
  2. Zone V (very high damage risk) covers the Kashmir valley, Himachal Pradesh, Uttarakhand, north Bihar, the north-east states, Kutch (Gujarat), the Andaman and Nicobar Islands and parts of western Maharashtra (Koyna). Zone IV (high damage risk) includes Delhi, parts of Uttar Pradesh, Bihar, West Bengal, Sikkim, Gujarat and western Maharashtra. Zone III (moderate) covers Kerala, Goa, coastal Maharashtra, parts of Andhra Pradesh, Tamil Nadu, Karnataka, Madhya Pradesh and Rajasthan. Zone II (low) covers the peninsular interior, including much of Rajasthan, Gujarat's south-east, and the Deccan plateau.
  3. Rajasthan lies largely in Zone II, but a significant western strip along the Aravalli and the Cambay margin falls in Zone III, and the Shekhawati-Jhunjhunu-Alwar belt and the Barmer-Jaisalmer margin are the more sensitive parts. The state has experienced damaging tremors, including the 1999 Chamoli-linked shocks felt in Rajasthan and the Bhuj 2001 tremors that damaged Barmer and Jaisalmer districts. The Aravalli range is a Precambrian suture zone with reactivated faults, and induced seismicity is a concern near reservoirs and mining belts. Rajasthan's hazard is thus moderate but not negligible, and building codes in Zone III districts must be enforced.
ZoneRiskApprox. PGAStates/regions (examples)
IILow0.10 gPeninsular interior; much of Rajasthan, Madhya Pradesh, Karnataka
IIIModerate0.16 gKerala, Goa, coastal Maharashtra, Tamil Nadu, parts of Rajasthan
IVHigh0.24 gDelhi, parts of UP, Bihar, West Bengal, Sikkim, Gujarat
VVery high0.36 gKashmir, Himachal, Uttarakhand, NE states, Kutch, Andamans

1.12.7Effects of Earthquakes

  1. Ground shaking is the primary cause of damage; its severity depends on magnitude, depth, distance, local soil and building quality. Site amplification on soft alluvium can increase shaking several-fold, which is why Mexico City (1985) and Bhuj's Ahmedabad suffered disproportionately at great distance. Ground rupture along the fault may displace roads, rails and pipelines. Shaking also triggers soil liquefaction, in which saturated loose sand loses strength and behaves as a fluid, causing buildings to sink or tilt, as at Niigata (1964) and in the Bhuj alluvial belt.
  2. Landslides and rockfalls are common in mountainous terrain, where shaking destabilises slopes; the 2005 Kashmir and 2015 Nepal quakes produced thousands of slides that blocked roads and rivers. Tsunamis are generated by shallow submarine thrust quakes with vertical sea-floor displacement, as in Sumatra 2004 and Tohoku 2011, and can travel across oceans. Fires follow where gas lines and electrical systems rupture, as in San Francisco 1906 and Kanto 1923. Secondary effects include dam failures, floods, disease outbreaks and disruption of lifelines such as water, power and communications.
  3. The loss of life and property differs sharply between rich and poor regions, even for comparable magnitudes. Rich regions have strict building codes, retrofitting, early-warning systems, insurance and rapid response, so Tohoku 2011 (M 9.0) in Japan killed far fewer than Kashmir 2005 (M 7.6) or Latur 1993 (M 6.2) in India. Poor regions suffer from unreinforced masonry, non-engineered construction, high density, weak enforcement and slow relief, and the poor often live on marginal, liquefaction-prone land. The Hyogo Framework (2005) and the Sendai Framework (2015-2030) therefore stress disaster risk reduction, code enforcement and community preparedness rather than relief alone.
RECALL ANCHOR
  1. Ring of Fire = 80 per cent; Alpide = 15 per cent; ridges = 5 per cent.
  2. Shallow 0-70, intermediate 70-300, deep 300-700 km; deepest about 700 km.
  3. Koyna 1967 = reservoir-induced; Bhuj 2001 = intraplate; Latur 1993 = shallow intraplate.
  4. Richter 1935 logarithmic; Mercalli I-XII descriptive; IS 1893 zones II-V.
  5. Rajasthan mostly Zone II, western strip Zone III; Kutch and Kashmir Zone V.
MIX-UP ALERT
  1. Magnitude vs intensity: magnitude is one value for the source (Richter/Mw), intensity varies place to place (Mercalli/MSK).
  2. Koyna vs Bhuj: Koyna 1967 was reservoir-induced in Maharashtra; Bhuj 2001 was a natural intraplate quake in Kutch.
  3. Circum-Pacific vs Alpide: the first is Pacific subduction and transform (80 per cent); the second is the Mediterranean-Himalayan collision belt (15 per cent).
  4. Zone I vs Zone II: Zone I was abolished in the 2002 revision and merged into Zone II.
EXAM TRAIL
  1. RAS and UPSC have asked about seismic zones of India and the causes of earthquakes; expect a map-based question on Rajasthan's zone.
  2. Likely angle: 'Discuss the causes of earthquakes and their global distribution with reference to the three major belts.'
  3. Likely angle: 'Explain reservoir-induced seismicity with special reference to Koyna.'
  4. Likely angle: 'Why does earthquake damage differ between developed and developing countries?'

1.13Shape of the Earth, Day and Night, Twilight and Great Circles

The geoid, proofs of sphericity, rotation, twilight, the graticule and great-circle navigation explained for Mains.

Evidence that the Earth is a sphere
Evidence that the Earth is a sphere
Latitude and longitude: the Earth's reference grid
Latitude and longitude: the Earth's reference grid
Dawn, dusk and the three twilights
Dawn, dusk and the three twilights
Great circles and great circle routes
Great circles and great circle routes

1.13.1The Geoid and the Earth's Dimensions

  1. The Earth is not a perfect sphere but an oblate spheroid (ellipsoid of revolution), flattened at the poles and bulging at the equator because of centrifugal force generated by rotation. The mathematical reference surface is the ellipsoid; the true physical surface of mean sea level extended under the continents is the geoid, a lumpy equipotential surface whose shape is measured by satellite gravimetry (GRACE, GOCE). The geoid deviates from the ellipsoid by up to about 100 m (the Indian Ocean geoid low is a famous depression of roughly that order).
  2. The standard dimensions (WGS-84 ellipsoid) are: equatorial radius 6,378 km, polar radius 6,357 km, a difference of about 21 km; equatorial circumference about 40,075 km and polar circumference about 40,008 km. Flattening f = (a − b)/a ≈ 1/298.257, i.e. about 0.3 per cent. The geocentric latitude differs from the geodetic latitude by up to about 11.5 minutes of arc at 45° latitude, a correction surveyors must apply.
  3. Because of flattening, the length of a degree of latitude increases from about 110.6 km at the equator to about 111.7 km at the poles, while a degree of longitude shrinks from about 111.3 km at the equator to zero at the poles (about 78.8 km at 45°). Gravity is also stronger at the poles (about 9.83 m/s²) than at the equator (about 9.78 m/s²), and a pendulum clock runs slightly fast at the poles. These measurable consequences are themselves evidence of the oblate shape.

1.13.2Evidence of Sphericity: Classical Proofs

  1. Aristotle (4th century BCE) argued for a spherical Earth from three observations: (a) the circular shadow of the Earth on the Moon during a lunar eclipse; (b) the change in visible circumpolar constellations as one travels north or south (stars seen in Egypt are not seen in Greece); and (c) the convergence of travellers — moving consistently in one direction brings one to the same place. These remain textbook proofs because they are observable without instruments.
  2. Eratosthenes (c. 240 BCE) measured the Earth's circumference at Alexandria and Syene (Aswan) on the summer solstice: at Syene the Sun was overhead (no shadow in a deep well), while at Alexandria, about 800 km north, the shadow gave an angle of about 7.2° (1/50 of a circle). Multiplying 800 km by 50 gave roughly 40,000 km, within a few per cent of the modern figure — a landmark of empirical geodesy.
  3. Magellan–Elcano's circumnavigation (1519–1522) proved empirically that one can sail west and return from the east, and that a day is lost crossing the International Date Line westward — a fact only explicable on a rotating globe. Later, satellite images (from TIROS-1 in 1960 to modern geostationary and polar-orbiting satellites) show the curved limb and the full disc of the Earth, the most direct modern proof.

1.13.3Evidence of Sphericity: Observational Proofs

  1. Ship's mast observation: a ship sailing away disappears hull-first, with the mast last visible; approaching ships show the mast first. This is because the curved surface of the sea intervenes. Similarly, the widening horizon with altitude — from sea level the horizon is about 5 km away; from a 10 m mast about 11 km; from an aircraft at 10 km altitude several hundred kilometres — is explicable only on a curved surface.
  2. The Bedford Level experiment (1838, Bedford River, England) was designed by Samuel Birley Rowbotham to test curvature over a 10 km canal; he claimed a flat result, but later repetitions by Alfred Russel Wallace (1870) and others, correcting for refraction, confirmed curvature. The episode is a classic cautionary tale about atmospheric refraction confounding measurements — examiners like it as an example of experimental error.
  3. Sunrise and sunset occur at different times at different longitudes and latitudes: eastern places see sunrise earlier; higher latitudes have longer summer days. The lunar eclipse shadow is always circular regardless of the Moon's position, which only a spherical Earth can cast. Together these prove both sphericity and rotation.
EvidencePrinciple involved
Lunar eclipse shadowEarth's shadow on the Moon is always circular — only a sphere casts a circular shadow from every angle
Ship's mast / hull-first disappearanceCurved sea surface hides lower parts first
Widening horizon with altitudeLine of sight tangent to a curved surface extends with height
Circumpolar star visibility changes with latitudeObserver's horizon plane tilts as latitude changes on a sphere
Eratosthenes' shadow measurementSun's rays parallel; shadow angle varies with distance on a curved surface
Magellan circumnavigation and date lineContinuous westward travel loses a day — only possible on a rotating globe
Satellite imageryDirect visual record of the curved limb and full disc
Gravity and degree-length variationOblate spheroid: gravity and degree length increase poleward

1.13.4Rotation, the Axis and the Circle of Illumination

  1. The Earth rotates west to east on its axis once in a sidereal day of 23 h 56 min 4 s (a solar day is 24 h because of the simultaneous orbital motion). The axis is inclined at 66.5° to the plane of the ecliptic (equivalently, 23.5° from the perpendicular to the ecliptic). This tilt, not distance from the Sun, causes the seasons.
  2. The circle of illumination is the great circle separating the lit and dark hemispheres; it is perpendicular to the Sun's rays. Because of the axial tilt, it is not a meridian except at the equinoxes. At the equinoxes (about 21 March and 23 September) it passes through both poles, giving 12 hours day and night everywhere. At the solstices (about 21 June and 22 December) it is tilted, producing polar day and polar night beyond the Arctic and Antarctic Circles (66.5°).
  3. Day and night lengths vary with latitude and season: at the equator they are nearly equal (about 12 h) all year; at 23.5° the range is modest; at 66.5° there is at least one 24-hour day and one 24-hour night; at the poles there are six months of day and six months of night. The midnight sun is seen within the Arctic/Antarctic Circles — e.g. at Tromsø (Norway, about 69.6°N) from about mid-May to late July.

1.13.5Twilight: Civil, Nautical and Astronomical

  1. Twilight is the diffused light before sunrise and after sunset caused by scattering of sunlight by the upper atmosphere (Rayleigh scattering) and by refraction. It is divided by the Sun's depression below the horizon: civil twilight (0° to 6°), nautical twilight (6° to 12°) and astronomical twilight (12° to 18°). Beyond 18° the sky is fully dark.
  2. Civil twilight is the period when outdoor activities are possible without artificial light; nautical twilight is when the horizon is still visible at sea for star sights; astronomical twilight is when faint stars become visible. At the equator twilight is short (about 20–25 minutes each stage) because the Sun sets almost vertically; at high latitudes it is long because the Sun sets at a shallow angle and the twilight zone is traversed slowly.
  3. Near the poles, twilight can last all night in summer (the 'white nights' of St Petersburg, about 60°N, in June), and in winter the Sun may not rise above the horizon for weeks, with only twilight at noon. Polar day and polar night occur because the tilted circle of illumination leaves the polar caps entirely lit or entirely dark for part of the year.

1.13.6Latitude and Longitude: The Graticule

  1. Latitude is the angular distance north or south of the equator, measured 0°–90°; longitude is the angular distance east or west of the Prime Meridian (Greenwich, adopted internationally in 1884 at the Washington conference), measured 0°–180°. Together they form the graticule. One degree of latitude is about 111 km; one degree of longitude is about 111 km × cos(latitude).
  2. Important parallels: Equator (0°), Tropic of Cancer (23.5°N), Tropic of Capricorn (23.5°S), Arctic Circle (66.5°N), Antarctic Circle (66.5°S), and the poles. Important meridians: Prime Meridian (0°), International Date Line (roughly 180°, zigzagging to avoid land), and the Indian Standard Meridian (82.5°E), which gives IST = UTC + 5:30.
  3. The International Date Line is not a straight meridian: it detours around the Bering Strait, the Aleutians, Kiribati and other island groups so that a single country or island chain is not split between two calendar dates. Crossing westward, one adds a day; eastward, one subtracts a day.

1.13.7Great Circles and Great-Circle Routes

  1. A great circle is any circle on the globe whose plane passes through the Earth's centre, dividing it into two equal hemispheres; its radius equals the Earth's radius. All meridians and the equator are great circles. A small circle is any other circle of latitude (e.g. the Tropics, the Arctic Circle), whose plane does not pass through the centre.
  2. The shortest path between two points on a sphere is the arc of the great circle joining them. Aircraft and ships therefore follow great-circle routes to save fuel and time. On a Mercator projection, a great circle appears as a curved line (except the equator and meridians), which is why flight paths look 'bent' on a flat map.
  3. The classic example is the Delhi–San Francisco route: the great circle passes over Central Asia, the Arctic and northern Canada, not across the Pacific as a flat map suggests. This polar route is shorter by roughly 1,000–2,000 km and saves several hours. Similarly, London–Tokyo and New York–Hong Kong flights use polar or near-polar tracks.
  4. Great-circle sailing was historically important for clippers on the Great Circle route around Cape Horn and for air navigation before satellite positioning. Modern GNSS and flight-management computers compute great-circle (and wind-optimised) tracks automatically, but the geometric principle remains the same.
FeatureGreat circleSmall circle
Plane through Earth's centreYesNo
Divides Earth into equal halvesYesNo
Shortest path between two pointsYes (arc)No
ExamplesEquator, all meridians, any circle through antipodesTropics, Arctic/Antarctic Circles, other parallels
Appearance on MercatorCurved (except equator/meridians)Straight horizontal lines
Use in navigationAircraft and ship routesLines of latitude for position

1.13.8Why the Shape Matters

  1. The oblate shape affects satellite orbits, GPS/GNSS positioning, map projections, gravity surveys and geodesy. India's Great Trigonometrical Survey (from 1802) and modern WGS-84 both depend on accurate ellipsoid parameters. The geoid is the reference for mean sea level and for height measurement (orthometric heights).
  2. In RAS and UPSC answers, link the shape to day and night, twilight duration, polar day/night, great-circle routes and time zones — examiners reward the causal chain, not isolated facts. A good answer moves from geoid → rotation → circle of illumination → twilight → graticule → great circles.
RECALL ANCHOR
  1. Geoid = lumpy mean-sea-level surface; ellipsoid = mathematical reference; flattening ≈ 1/298.
  2. Equatorial radius 6,378 km, polar 6,357 km, difference ≈ 21 km.
  3. Eratosthenes: 7.2° shadow at Alexandria, ~800 km from Syene, circumference ≈ 40,000 km.
  4. Axis tilt 66.5° to ecliptic (23.5° from perpendicular); circle of illumination tilts with seasons.
  5. Twilight: civil 6°, nautical 12°, astronomical 18°; short at equator, long at poles.
  6. Great circle = plane through centre; shortest path; Delhi–San Francisco flies over the Arctic.
MIX-UP ALERT
  1. Geoid vs ellipsoid: the geoid is the physical equipotential surface; the ellipsoid is the idealised mathematical shape used for coordinates.
  2. Great circle vs small circle: a great circle's plane passes through the Earth's centre (equator, meridians); a small circle's does not (Tropics, Arctic Circle).
  3. Civil vs nautical twilight: civil is 6° (outdoor activity possible); nautical is 12° (horizon visible for star sights); astronomical is 18° (sky fully dark).
  4. Polar day vs midnight sun: polar day is any 24-hour daylight within the polar circles; midnight sun is the specific phenomenon of the Sun visible at midnight.
EXAM TRAIL
  1. RAS has asked about day and night, twilight and the circle of illumination in Prelims and in short-answer Mains questions.
  2. UPSC Geography optional has asked about great-circle routes and the significance of the Earth's shape.
  3. Likely angle: 'Explain why twilight is short at the equator and long at the poles' or 'Why do aircraft fly polar routes? Illustrate with the Delhi–San Francisco example.'
  4. Link the geoid and flattening to modern GNSS and sea-level measurement for a contemporary edge.

1.14Classification of Plateaus, Plains and the Influence of Rock Type on Landscape

How plateaus and plains are classified by origin and position, and how rock type sculpts landforms.

1.14.1Plateaus: The General Character

  1. A plateau is an elevated tract of comparatively flat or gently undulating land, standing conspicuously above the surrounding country and usually bounded on at least one side by a steep escarpment or scarp. Its summit may be a true structural surface (a structural plateau), a warped uplift, a lava sheet or a dissected upland; hence plateaus are defined by elevation plus flatness, not by altitude alone. Plateaus occupy roughly one-third of the earth's land surface and are second only to mountains in average height, ranging from the Deccan at 300-900 m to the Tibetan Plateau averaging 4,500-5,000 m. They are storehouses of minerals, sites of ancient civilisations and, in the tropics, the healthiest habitats because of cooler air and freer drainage.
  2. Plateaus are classified on two independent criteria: (a) origin - how the upland came to stand high (tectonic uplift, lava accumulation, erosion of surrounding lowland) and (b) position - where it lies relative to fold mountains and shields. The two schemes overlap: the Tibetan Plateau is at once intermontane and tectonic; the Deccan is both a shield remnant and a volcanic plateau. In answers, always state the criterion before naming the type, and give height, rock and one Indian example.

1.14.2Intermontane Plateaus

  1. Intermontane plateaus are the highest and most extensive type, lying enclosed between fold mountain ranges and formed by the same orogenic compression that raised the ranges, the intervening block being uplifted but little folded. The Tibetan Plateau (average 4,500-5,000 m, about 2.5 million sq km) lies between the Himalaya in the south and the Kunlun in the north, drained by the Indus, Sutlej and Brahmaputra; it is the source region of Asia's major rivers and is called the 'Roof of the World'. The Bolivian (Altiplano) Plateau of the Andes, at 3,600-4,000 m, between the Cordillera Oriental and Occidental, holds Lake Titicaca and the mining towns of Potosi and Oruro. The Pamir ('Roof of the World'), Armenian and Iranian plateaus are further examples.
  2. Intermontane plateaus are cold, arid and thinly populated, but strategically and economically vital: (a) Tibet controls the headwaters of rivers on which India, Pakistan, Bangladesh and Southeast Asia depend; (b) the Altiplano yields tin, silver and copper, and the Tibetan plateau has chromite, copper and lithium-bearing brines; (c) their high passes - Nathu La, Shipki La - have been historic trade corridors. Their rain-shadow aridity (Leh receives under 100 mm annually) and periglacial processes make them classic study areas for cold-desert landforms.

1.14.3Piedmont Plateaus

  1. A piedmont plateau lies at the foot of a mountain range, bounded by mountains on one side and by a plain or sea on the other; it is typically a buried or bevelled upland left standing as the adjacent lowland was eroded or downfaulted. The Patagonian Plateau of Argentina lies east of the Andes, between the mountains and the Atlantic, at 300-1,500 m, built of horizontal Mesozoic-Tertiary sediments capped by basalt flows and cut by deep canyons; its dry, windy, sheep-rearing surface is one of the emptiest regions on earth. The Appalachian Piedmont of the eastern USA is a 200-400 m belt of old crystalline rocks between the Blue Ridge and the Atlantic Coastal Plain, underlain by granite and gneiss and famous for its fall-line waterfalls where rivers cross from hard rock to soft coastal sediments.
  2. The Indian analogue is the Malwa Plateau and the Bundelkhand upland, which stand at the northern foot of the Vindhyas and pass northwards into the Ganga plain; the Kutch and Kathiawar uplands similarly abut the Aravalli and the sea. Piedmont plateaus are important because (a) their fall-line sites powered early textile mills (Piedmont Carolina), (b) their coarse piedmont gravels and alluvial fans are aquifers, and (c) their stepped surfaces record cycles of uplift and erosion useful in reconstructing neotectonics.

1.14.4Continental or Shield Plateaus

  1. Continental (shield) plateaus are the oldest and most stable uplands, formed by the broad, gentle upwarping of a cratonic shield of Archaean crystalline rock, with no folding and no surrounding mountains. The Deccan (Peninsular) Plateau of India, roughly 1.6 million sq km, averages 600-900 m, slopes east from the Western Ghats (over 1,000 m) to the Eastern Ghats, and is bounded by the Aravalli, Vindhya, Satpura and Ajanta ranges; it is subdivided into the Deccan Trap region, Telangana, Chhattisgarh, Bundelkhand and the Tamil Nadu upland. The Arabian Plateau (1,200-1,800 m in the west, falling to the Red Sea and Persian Gulf) and the African Plateau (the East African and South African uplands, over 1,000 m, with the Drakensberg scarp) are the other great examples; the Brazilian and Australian (Western) plateaus belong here too.
  2. Shield plateaus are mineral storehouses: the Chhota Nagpur and Bastar uplands of the Deccan yield iron, coal, manganese, bauxite and mica; the Witwatersrand of the African plateau is the world's richest gold field; the Arabian plateau holds the world's largest oil reserves in its eastern sedimentary flank. Their old, leached soils (laterite, red soils) and monsoonal rainfall support rice, millets, cotton and plantation crops, while their flat tops and stable crust make them ideal for large dams, observatories and spaceports (Sriharikota lies on the eastern coastal margin of the same shield).

1.14.5Volcanic Plateaus

  1. Volcanic plateaus are built by the accumulation of successive basaltic lava flows from fissure eruptions, giving a flat-topped upland of great thickness and dark colour. The Deccan Traps of India were erupted around the Cretaceous-Palaeogene boundary (about 66 million years ago) over the Reunion hotspot, cover roughly 500,000 sq km and reach over 2,000 m thickness near Mumbai; the Western Ghats are the eroded western edge of this lava pile, and the Ambenali, Mahabaleshwar and Panhala formations are classic flow units. The Columbia-Snake Plateau of the north-western USA, about 200,000 sq km and 1,000-2,000 m thick, was flooded by Miocene basalt and is now cut by the Snake River canyon; the Icelandic and Ethiopian plateaus are further examples.
  2. Volcanic plateaus weather into black cotton soil (regur) in the Deccan, which is moisture-retentive and self-ploughing, supporting cotton, jowar and sugarcane; the rock is hard, jointed and columnar, giving waterfalls (Jog) where rivers cross flow margins, and step-like terraces in the Ghats. Their porous, vesicular tops store groundwater in traps and dykes, but the high fluoride content of some Deccan aquifers is a public-health problem. The Columbia-Snake plateau, by contrast, is a wheat and apple country irrigated from the Grand Coulee dam.

1.14.6Dissected Plateaus

  1. A dissected plateau is one that has been so deeply carved by stream, glacial or karst erosion that its original flat surface survives only as isolated mesas, buttes and interfluves; it represents a late stage in the cycle of erosion. The Colorado Plateau of the USA, at 1,500-3,000 m, is cut by the Grand Canyon of the Colorado River into a staircase of mesas and buttes in horizontal sandstone, shale and limestone, and is the type example of arid dissection. The Scottish Highlands, dissected by glacial troughs and corries, and the Chota Nagpur and Malnad uplands of India, dissected by the Damodar and Sharavati, belong here; the Ranchi and Hazaribagh plateaus are classic etchplains with inselbergs.
  2. Dissection has practical consequences: (a) it creates steep slopes and thin soils that limit cultivation and favour forestry, hydel power and tourism; (b) the exposed strata of the Colorado Plateau are a natural geological laboratory and host uranium and coal; (c) the isolated mesas of the Deccan and Africa are refuges of endemic flora and sites of tribal settlement; (d) the badlands of the Chambal ravines are a spectacular Indian example of accelerated dissection by gully erosion.

1.14.7Plains: Structural and Erosional

  1. A plain is a broad, low, nearly level tract of land with little local relief, formed either by the deposition of sediment, by the erosion of an uplifted surface, or by the structural flatness of gently dipping strata. Structural plains are the least modified: the Great Plains of North America, 1,500 km long and 500 km wide, are a gently eastward-dipping surface of nearly horizontal Palaeozoic-Mesozoic sediments, and the Russian Platform (East European Plain) is a vast Precambrian basement covered by flat-lying sediments. The Ganga plain is structurally a foredeep filled with Indo-Gangetic alluvium, and the Mississippi and Amazon lowlands are structural basins.
  2. Erosional plains are produced by the levelling of an uplifted landmass by denudation. A peneplain is the end product of the Davisian cycle, a nearly featureless surface with residual monadnocks; a pediplain is the arid-semiarid equivalent, formed by the coalescence of pediments under sheet wash, with residual inselbergs - the African and Deccan surfaces are classic. Glaciated plains of Canada and Scandinavia are ice-scoured lowlands with rock basins, striations and thousands of lakes; karst plains such as the Causses and the Slovenian Kras are limestone surfaces planed by solution, with poljes and sinkholes. The Deccan lava plateau and the Aravalli uplands also carry etchplains of this type.

1.14.8Plains: Depositional Types

  1. Depositional plains are built by water, wind or ice. Alluvial plains are formed by rivers: the Ganga-Yamuna plain of India, about 1,000 km wide and built of khadar (new) and bhangar (old) alluvium, is the world's most densely farmed; flood plains are the strips flooded each year, with natural levees, ox-bows and meander scars; deltas such as the Sundarbans (Ganga-Brahmaputra), the Godavari-Krishna deltas and the Nile and Mississippi deltas are built where rivers enter standing water. Loess plains of north China (the Hwang Ho basin, loess up to 300 m thick, blown from the Gobi), glacial outwash plains (sandur of Iceland, the Indo-Gangetic outwash at the Himalayan foot) and lacustrine plains - the Kashmir Valley (ancient Karewa lake beds at 1,600 m) and the Great Lakes plains - complete the family.
  2. Coastal plains are a special depositional class: the eastern coastal plain of India, 80-100 km wide, with lagoons (Chilika, Pulicat) and spits, contrasts with the narrow, cliffed western coastal plain; the Atlantic and Gulf Coastal Plain of the USA is a classic emerged plain of Tertiary sediments. Depositional plains are the granaries of the world: the Ganga plain supports over 400 million people, the Mississippi and Ukraine plains are wheat belts, and the Nile and Indus plains depend on irrigation. Their flatness, fertile alluvium, groundwater and transport routes explain the rise of Harappa, Magadha, Egypt and Mesopotamia.
TypeOrigin/ProcessExampleHeight/ExtentEconomic Note
Intermontane plateauTectonic uplift between fold rangesTibet, Bolivia (Altiplano)4,500-5,000 m; 3,600-4,000 mRiver sources; minerals; cold desert
Piedmont plateauUplifted/buried block at mountain footPatagonia, Appalachian Piedmont300-1,500 m; 200-400 mFall-line power; gravel aquifers
Continental/shield plateauGentle upwarp of cratonDeccan, Arabian, African600-900 m; 1,200-1,800 mMinerals; old soils; stable sites
Volcanic plateauFissure basalt flowsDeccan Traps, Columbia-Snake500,000 sq km; 200,000 sq kmBlack soil; waterfalls; groundwater
Dissected plateauDeep fluvial/glacial/karst erosionColorado, Scottish Highlands1,500-3,000 mHydel, tourism, endemic flora
Structural plainGently dipping strata; foredeep fillGreat Plains, Russian PlatformContinental scaleWheat, grazing, oil
Erosional plainPeneplanation/pedimentation/glaciationCanadian Shield, African pediplainContinental scaleLakes, forestry, ranching
Depositional plainAlluvium, loess, outwash, lacustrineGanga plain, north China loess1,000 km wideGranary; dense population
Coastal plainMarine and fluvial depositionEast coast India, Atlantic USA80-100 km widePorts, lagoons, fisheries

1.14.9Economic Importance of Plains

  1. Plains are the most productive and most densely settled of all landforms: their deep alluvium, gentle slopes, mechanisable fields and abundant water support intensive agriculture, and their low gradients favour canals, roads, railways and airports. The Ganga plain alone feeds a large share of India's population, the Great Plains are the 'breadbasket' of North America, and the Ukrainian and Danubian plains are Europe's granaries. Plains also host industries (the Ruhr, the Ganga-Yamuna doab), cities (Delhi, Kanpur, Patna) and capitals, because flat land is cheap to build on and easy to defend and administer.
  2. The negative side must be balanced: plains suffer floods (the Kosi 'sorrow of Bihar', the Brahmaputra), waterlogging and salinity (Punjab, Indus basin), channel shifting and loss of soil fertility through continuous cropping. Their monotonous relief offers poor hydel sites and little mineral wealth, and their dense population strains land, water and sanitation. Hence modern plain management stresses embankments, drainage, groundwater recharge, crop diversification and flood-plain zoning.

1.14.10Rock Type: Permeability, Porosity and Resistance

  1. Permeability is the capacity of rock to transmit water through connected voids; porosity is the proportion of void space, whether connected or not. Sandstone and chalk are both porous and permeable and form aquifers; clay is highly porous but impermeable, so it holds water and forms waterlogged vales and spring lines; granite and basalt are impermeable except along joints and flow contacts, where they yield modest supplies. Well-sorted coarse sand is the best aquifer; unweathered shale the worst. In the Deccan, vesicular trap and jointed flow tops are the water-bearing horizons, while massive trap is dry - a fact that governs borewell siting across Maharashtra.
  2. Resistance to erosion decides which rocks stand proud and which are hollowed out. Quartzite, granite, basalt and hard limestone resist abrasion and chemical attack and form ridges, plateaus and scarps; shale, clay and soft sandstone are readily removed and form vales, basins and lowlands. Because climate controls the dominant process - frost shattering in cold lands, solution in humid limestone, wind abrasion in deserts - the same rock can be resistant in one climate and weak in another; limestone is tough in arid lands but dissolves rapidly in the wet tropics.

1.14.11Jointing, Granite Tors and Limestone Scenery

  1. Jointing multiplies the surface area exposed to weathering and so accelerates block disintegration; widely spaced vertical joints in granite produce tors - residual blocks perched on a bevelled surface, as on Dartmoor, in Cornwall, on Karnataka's granite uplands and at Hampi. The mechanism is deep chemical weathering along joints in a humid climate, followed by stripping of the rotten rock (etching) to leave core stones. Basalt with columnar jointing gives the Giant's Causeway and the hexagonal columns of the Deccan; sandstone with cross-bedding gives arched alcoves and rock shelters (Bhimbetka).
  2. Limestone and chalk scenery is karstic: carbonation by rain water charged with carbon dioxide dissolves calcium carbonate, producing clints and grykes, sinkholes, swallow holes, dry valleys, caves, stalactites and stalagmites, and poljes. Classic areas are the Kras of Slovenia, the Causses of France, Yorkshire's limestone and Kent's chalk in England, and the Borra and Belum caves of Andhra Pradesh in India. Chalk, being soft and porous, gives rolling downs with dry valleys and coombes, and its spring line fixes village sites; limestone gives thin dry soils and sparse vegetation, but its aquifers supply cities such as London and Mumbai's hinterland.

1.14.12Clay Vales, Sandstone Ridges, Basalt Plateaus and Differential Erosion

  1. Where alternating hard and soft strata are gently folded or tilted, differential erosion produces scarps, vales and cuestas: the Vale of White Horse and Vale of Aylesbury are clay vales between chalk downs, and the Weald is a denuded dome of Hastings Sands and Weald Clay. A cuesta is an asymmetrical ridge with a steep scarp slope and a gentle dip slope, formed where strata dip at a low angle - the Cotswold and North Downs are examples; hogbacks form where the dip is steep. In India, the Aravalli quartzite ridges, the Vindhyan sandstone scarps and the Satpura basalt-capped plateaus show the same principle.
  2. Basalt plateaus weather into stepped terraces and mesa-like residual hills (the 'table lands' of the Deccan), with black soil in the hollows; sandstone ridges such as the Nilgiri and Kurnool beds form strike ridges and waterfall steps; clay vales are wet, fertile and densely farmed but prone to flooding and landslips. The controlling idea is differential erosion: landforms express the relative resistance of rocks, so a geological map is the key to reading a landscape. Structural geomorphology uses this to reconstruct fold axes, dip and fault lines from the trend of scarps and cuestas.
RockPermeability/PorosityResistanceTypical LandformExample
GraniteLow; joint-controlledHighTors, inselbergs, uplandsDartmoor, Hampi
BasaltLow; vesicular/jointed topsHighPlateaus, steps, waterfallsDeccan Traps, Columbia
SandstoneHigh; porous and permeableModerate-highRidges, escarpments, alcovesVindhyas, Colorado
Limestone/chalkHigh; solubleModerateKarst, dry valleys, cavesKras, Yorkshire, Borra
Clay/shaleHigh porosity, low permeabilityLowVales, basins, spring linesVale of Aylesbury
QuartziteVery lowVery highSharp ridges, strike hillsAravalli, Kurnool
RECALL ANCHOR
  1. Intermontane = between ranges (Tibet 4,500-5,000 m; Altiplano 3,600-4,000 m)
  2. Piedmont = at mountain foot (Patagonia, Appalachian fall-line)
  3. Shield = old craton upwarp (Deccan, Arabian, African)
  4. Volcanic = fissure basalt (Deccan Traps ~66 Ma; Columbia-Snake)
  5. Dissected = late-cycle carving (Colorado mesas, Scottish Highlands)
  6. Plains: structural (Great Plains) - erosional (peneplain, pediplain) - depositional (alluvial, loess, lacustrine)
  7. Rock logic: clay = vale, chalk/limestone = karst, granite = tor, basalt = plateau, sandstone = ridge
MIX-UP ALERT
  1. Peneplain vs pediplain: peneplain is the humid, Davisian end-product with monadnocks; pediplain is the arid-semiarid surface of coalesced pediments with inselbergs.
  2. Porosity vs permeability: clay is porous but impermeable, sandstone is both, so only the latter is a good aquifer.
  3. Cuesta vs hogback: cuesta has a gentle dip slope and steep scarp at low dip; hogback is a sharp symmetrical ridge at steep dip.
  4. Structural vs depositional plain: the Great Plains are structural (dipping strata), the Ganga plain is depositional (alluvium-filled foredeep).
EXAM TRAIL
  1. RAS has repeatedly asked plateau classification with Indian examples and the economic significance of the Deccan and Malwa uplands.
  2. UPSC Mains has asked how rock structure and lithology control landform development - use the cuesta/karst/tor triad.
  3. Likely angle: 'Plains are more important than plateaus for human occupancy - discuss' or a map-based question locating Tibet, Patagonia, Colorado and the Deccan Traps.
  4. Likely angle: distinguish erosional from depositional plains with Indian examples, and explain differential erosion with a diagram.